Need help?Do you have a question about the Witschi ANALYZER Q1 and is the answer not in the manual?
General| Brand | Witschi |
|---|---|
| Model | ANALYZER Q1 |
| Category | Test Equipment |
| Language | English |
Describes the intended uses and environments for the Analyzer Q1 test instrument.
Identifies and describes the main operational zone and its components on the Analyzer Q1.
Details the connection ports and main switch located on the back of the Analyzer Q1.
Describes the tiltable LCD screen, its resolution, and how it displays information.
Explains the process of powering the Analyzer Q1 instrument on and off using the rear switch.
Guides users on how to choose and activate different measurement modes on the Analyzer Q1.
Details how to adjust and configure various parameters for different measurement functions.
Describes how to access context-sensitive help information for functions and results.
Details the steps for setting up and performing a rate measurement on quartz watches.
Explains the process of measuring current consumption in quartz watches for quality assessment.
Explains how to interpret the rate deviation and beat error results for mechanical watches.
Explains characteristics and testing procedures for watches with inhibition compensation.
Explains the analysis of motor current pulses for watch diagnostics.
Describes testing watches with adaptive motor pulses and their power requirements.
Explains testing the End Of Life (EOL) function for battery status indication.
Provides detailed information and typical values for watch battery testing.
To Next Page
