Witt GP 52 - 3.3 ORDER INFORMATION

- Technical Information - 8
3.3 ORDER INFORMATION
Please specify the following data when ordering a pump:
 refrigerant
 type GP 41, GP 42, GP 51, GP 51a, GP 52 or GP82
 For models 2 the required coupling size (or motor size of the motor to be fitted later)
 For models 4 the selected motor
 Voltage and frequency.
 (Special requirements if applicable, e.g. PN 65 for HRP 3232)
If you are unsure about the selection, please provide the following additional information:
 evaporating temperature ....°C
 volume flow .... m
3
/h or capacity and re-circulation rate
 required pressure head …. m
3.4 CODES / CERTIFICATES / APPROVALS
The following certifications are available and can be downloaded from our website www.th-
witt.com:
declaration of incorporation of a partly completed machinery according to EG machinery directive,
conformity declaration according to EU- low voltage directive.