Need help?Do you have a question about the Witt GP 42 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Weight | 12 kg |
| Max Flow Rate | 42 m³/h |
| Power | 1200 W |
Outlines mandatory safety precautions for personnel and procedures during installation and service.
Specifies design, test, and permitted operating pressure ranges for the pump housing.
Lists pump components, their dimensions, article numbers, and weights (first part).
Continues the parts list for pump components, detailing dimensions, article numbers, and weights (second part).
Explains the operational principle of the WITT refrigerant pump and its internal workings.
Presents performance data (pressure vs. flow) for pump models at specific RPM.
Outlines protective measures against overpressure, dry-run, and other operational hazards.
Specifies checks for system readiness, refrigerant charge, and control systems before commissioning.
Guides on the pump commissioning process, including pressure recording and sound monitoring.
Explains how to check and replenish the oil level in the pump's oil chamber.
Provides a step-by-step visual guide for replacing the pump's shaft seals.
Details the process for replacing the pump's bearings, including disassembly and reassembly steps.
Lists critical warnings and mandatory safety precautions for pump operation and servicing.
To Next Page
