Wittenborg 9100 - Clean Waste Bucket and Machine Interior

6
Replace Mixing Bowls and Powder Traps - cont’d
SERVICE MACHINE - WEEKLY TASKS
4.5 Position and align
parts on mixing bowls
to matching parts in
machine. Next, turn
green ring clockwise
to lock in place. Then,
reconnect blue tubes
to mixing bowls.
4.6 Remove waste bucket.
Then, wipe waste
bucket tray with dry
cloth and then clean
lower part of machine
and inside of door.
4.7 Return grounds tray
container to machine.
Reattach drip tray
assembly to bottom
and close door.
4.8 Follow steps 3.1 and 3.2 in “Complete Fast Actions Operations” on Page 4.