Witter ZX404 - Installation - Critical Fasteners; Tighten M16 nuts fully; Ensure electrical cable is not stressed

IMPORTANT! ENSURE THE M16 NUTS ARE TIGHTENED FULLY (214Nm).
Note: Ensure that the
cable to the socket is
not stressed or pulled too tight.
Note: Discard removed bolts,washers
and nuts from electrical socket.
Use the new longer bolts
and Nyloc nuts provided.
214Nm
page 12
page 5
bike 1
bike 2
bike 3
Cycle Support Frame.
bike 4
bike 1
bikes 3 & 4