21
WOLF TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
PROBLEM PROBABLE CAUSE CORRECTION
Cooktop does not
Cooktop is in Lock mode. Touch and hold the "key"
function at all
symbol for 3 seconds to unlock
the control panel.
No electricity is being Have an electrician check the
supplied to the cooktop. house power supply.
Fuse is blown or circuit Have an electrician replace the
breaker is tripped. fuse or reset the circuit breaker.
Cooktop is not connected to Have an electrician verify that
a proper electrical circuit. the proper voltage is being
applied to the cooktop.
Induction elements do
Improper cookware is Select the proper cookware as
not heat properly
being used. outlined in Cookware Selection
on page 19.
Power supply connection Have an electrician tighten
is loose. connections at the terminal box.
Cooktop is not connected to Have an electrician verify that
a proper electrical circuit. the proper voltage is being
applied to the cooktop.
Control panel blinks and
Improper cookware is Select the proper cookware as
cooktop will not heat
being used. outlined in Cookware Selection
on page 19.
Unit may be in Showroom Contact Wolf Customer Service
mode. for instruction.
To Next Page
Loading...
