wolfappliance.com | 9
INSTALLATION
LIGHT BULB
CHANGER
Light bulb
Filters
Complete the Installation
FILTERS
Orient the lters with the lines running vertically. To install,
place the top edge of the lter against the spring, press
upward and rotate the bottom into position. Slide the outer
lters over to reinstall the center lter, if applicable. Refer to
the illustration below.
LIGHT BULBS
A suction-cup-style light bulb changer is provided with
the hood. To install, use the changer to push the bulb into
the receptacle and rotate counterclockwise one-quarter
turn. Refer to the illustration below.
To Next Page
