14 03
General Safety Rules
Warning
Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.1.
Do not operate power tools in explosive atmospheres, such as in the presence of fl ammable liquids, 2.
gases, or dust. Power tools create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you 3.
to lose control.
Electrical safety
Grounded tools must be plugged into an outlet properly installed and grounded in accordance with 4.
all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not
use any adaptor plugs. Check with a qualifi ed electrician if you are in doubt as to whether the outlet is
properly grounded. If the tools should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is 5.
an increased risk of electric shock if your body is grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk 6.
of electric shock.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord 7.
away from heat, oil, harp edges or moving parts. Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use 8.
tool while tired or under the infl uence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewellery. Contain long hair. Keep your hair, clothing, and 9.
gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your fi nger on the 10.
switch or plugging in tools that have the switch on invites accidents.
Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached 11.
to a rotating part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables 12.
better control of the tool in unexpected situations.
Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or 13.
hearing protection must be used for appropriate conditions. Ordinary eye or sun glasses are NOT eye
protection.
!
Warning: As with all tools keep away from children
Warranty
-----------------------------------------------------------------------------------------------------------------------------------------------
Congratulations! Y
ou have made an excellent choice with the purchase of this Quality product. Our com-
mitment to quality also includes our service. Should you, contrary to expectations, experience defects due
to material or manufacturing faults during private use within 12 months of the date of purchase we shall be
liable for warranty in accordance with statutory warranty regulations, provided that: - The device was not put
to any use other than the intended.- Was not overloaded. - Was not used with the wrong accessories. - Re-
pairs were not carried out by any other than the authorised workshop. The warranty is only valid in connec-
tion with the original receipt. Please keep in a safe place. The warranty does not affect your statutory rights.
The product is guaranteed for a period of 12 months beginning on the day of purchase. Keep your purchase
receipt safe as proof of the date of purchase. The guarantee period can only be extended for the duration of
any repair required.
During the warranty period, defective devices can be sent FREIGHT PREPAID to the service address stated
at the end of this booklet. We will, at our discretion either repair or exchange the device in accordance with
warranty legislation.
Please include the Proof of purchase when sending in your product for repair.
After the warranty has expired you can still send defective devices for repairs FREIGHT PREPAID to the
address at the end of this booklet. Quotes as well as repairs after warranty period are to be paid for in all
cases.
Ensure the product is sent well packed as no responsibility can be accepted for items lost or damaged in
transit. This warranty does not affect your statutory rights.
HELPLINE
-----------------------------------------------------------------------------------------------------------------------------------------------
For any questions relating to operational or safety matters contact:
UKHS Customer Helpline on: 08448 092 592
Monday-Friday: 8.30am - 6.00pm
Saturday: 9am - 1pm
To Next Page
Loading...