wolfappliance.com | 11
FACTORY SETTINGS
To Restore Factory Settings:
1 Touch Settings four times.
2 Touch Start. “FACTORY SETTINGS RESTORED” appears
on the control panel display.
DEMONSTRATION MODE
Demonstration mode allows operation to be demonstrated
without power to the speed oven.
To Enter Demonstration Mode:
1 Touch Settings five times.
2 Touch 1.
3 Touch Start. “DEMO ON” appears on the control panel
display. “DEMO” remains on the display.
To Exit Demonstration Mode:
1 Touch Settings five times.
2 Touch 6.
3 Touch Start. “DEMO OFF” appears on the control panel
display.
Settings
COOK TIME COMPLETION REMINDER
Upon completion, the oven chimes every ten seconds for
the first minute; then every three minutes (for one hour)
until Stop/Clear is touched.
To Eliminate the Reminder:
1 Touch Settings twice.
2 Touch 6.
3 Touch Start. “REMIND SIGNAL OFF” appears on the
control panel display.
To Restore the Reminder:
1 Touch Settings twice.
2 Touch 1.
3 Touch Start. “REMIND SIGNAL ON” appears on the
control panel display.
WEIGHT UNIT
For cooking modes where weight is required, the default
unit of measure can be changed from pounds to kilograms.
To Change the Unit of Measure to Kilograms:
1 Touch Settings three times.
2 Touch 6.
3 Touch Start. “KGS SET” appears on the control panel
display.
To Change the Unit of Measure to Pounds:
1 Touch Settings three times.
2 Touch 1.
3 Touch Start. “LBS SET” appears on the control panel
display.
Oven Operation
To Next Page
Loading...
