2
I MPORTANT I NFORMATION
IMPORTANT NOTE: This appliance
must be installed in accordance with
National Electrical Codes, as well as
all state, municipal and local codes.
The correct voltage, frequency and
amperage must be supplied to the
appliance from a dedicated, ground-
ed circuit which is protected by a
properly sized circuit breaker or time
delay fuse. The proper voltage,
frequency, and amperage ratings are
listed on the product rating plate.
Record the model and serial numbers
before installing the wall hood. Both
numbers are listed on the rating
plate, located on the left wall of hood
shell.
Model #
Serial #
If you have questions concerning the
installation of this product, call Wolf
Appliance Company, LLC at (800)
332-9513.
If you received a damaged wall hood
you should immediately contact your
dealer or builder.
IMPORTANT NOTE: This
installation must be completed by a
qualified installer or service agency.
Before you begin installation, read
these instructions completely and
carefully.
• INSTALLER: please retain these
instructions for local inspector’s
reference, then leave them with the
homeowner.
• Please read the entire installation
instructions prior to installation.
• HOMEOWNER: please read and
keep these instructions for future
reference.
• Please read the entire Wolf
Pro Series Ventilation Use & Care
Information book prior to use.
As you follow these installation
instructions, take particular note of
the CAUTION and WARNING
symbols when they appear. This
information is important for the safe
and efficient installation of the Wolf
Pro Series wall hood.
In addition, the printed instructions
may signal an IMPORTANT NOTE,
which highlights information that is
especially important for a problem-
free installation.
To Next Page
Loading...
