Planning Information
30" (762) Warming Drawer
MODEL WWD30 – STAINLESS STEEL DRAWER FRONT
3
Dimensions in parentheses are in
millimeters unless otherwise specified.
Dimensions may vary by ±
1
/
8
" (3).
SPECIFICATIONS
Overall Drawer Width 29
7
/8" (759)
Overall Drawer Height 10
1
/4" (260)
Overall Drawer Depth 27
1
/8" (689)
Overall Depth (behind frame) 23
1
/2" (597)
Recommended Cabinet Width 33" (838)
Minimum Cabinet Width 30" (762)
Minimum Cabinet Depth 24" (610)
Minimum Base Support 200 lbs (91 kg)
Rough Opening Width 28
5
/8" (727)
Rough Opening Height 9
1
/8" (232)
Rough Opening Depth 23
7
/8" (606)
Heating Element 850 W
Electrical Supply Requirements 110/120 V AC, 50/60 Hz
15 amp dedicated circuit
Power Cord 6 ft (1.8 m) power cord with
3-prong grounded plug
Shipping Weight 100 lbs (45 kg)
Special Note Installation specifications vary
for stainless steel drawer front and
integrated drawer front applications
Specifications are subject to change without notice.
FRONT PANEL OPTIONS
Classic Stainless Steel WWDFRONT/S
Platinum Stainless Steel WWDFRONT/P
Carbon Stainless Steel WWDFRONT/B
Warming drawer is sold as a base unit
only, one of the above stainless steel
drawer front panels is required. Panels are
ordered and shipped as a sales accessory
and include a tubular handle.
ACCESSORIES
Six-piece container set with lids
and pan rack
Accessories are available through
your Wolf dealer. To obtain local dealer
information, visit the Locator section
of our website, wolfappliance.com.
Model WWD30
Stainless Steel Drawer Front
To Next Page
Loading...
