Rear camera installation
We recommend install the rear camera above the license plate.
1. Fix camera with 3M adhesive
Find a best location tear off the 3M adhesive on the rear camera, fix
the rear camera near by the car license plate lamp. (if you need to
adjust the angle, please attach the rear camera bracket to the rear
camera and tighten it with screws first).
2. Remove the Panel
Remove the inner panel of the trunk to expose the rear wiring
compartment of the car. Open the trunk and look for a sturdy inner
panel covering the other side of the license plate installation area.
Then, insert a decorative removal tool or another thin device behind
the panel and pry it apart.
16
To Next Page
Loading...
