1. The vehicle must be within a large area.
2. Insert the GPS plug again.
3. Place the GPS plug upward.
4. Restart.
2. Once the GPS is installed, the GPS icon on the home screen will show. After the GPS signal has
been received, it will show direction and speed.
Q: Why is my GPS not working? /How to use GPS ?
A: If you cannot receive the signal after inserting the GPS, please follow the steps below.
5. It will be recognized after about 40 seconds. If still cannot receive the signal, it may be a GPS
problem. Please CONTACT US and we will help you solve this problem.
00:08
08:39
10/07
PM
Fri.
24
To Next Page
Loading...
