t
19
Introduction
• CAUTION! Read all the safety information and instructions that were supplied
with the FKS 145 guide rail and the power tools used. Failure to comply
with safety information and instructions can lead to electric shock,
fire and/or serious injury.
• Keep the manual in a safe place for future reference.
Symbols and meanings
Read manual/instructions.
Warning of danger.
Read the safety information.
Wear safety goggles.
Wear ear protection.
Wear a dust mask.
Unplug from the mains.
Remove the battery pack.
Assembly tool
1 Allen key: A/F 2.5
(included in scope of delivery)
1 Allen key: A/F 4
(not included in scope of delivery)
1 spanner: A/F 10
(not included in scope of delivery)
Intended use
• The FKS 145 is an accessory for circular hand saws consisting of a mounting carriage with
matching guide rail
• For precise, straight and long cuts
• For cutting edges with few/no tears
• Surface protection
• For cutting or shortening kitchen worktops, doors, etc.
• For commercially available hand saw blades with a saw blade diameter of min. 130 mm to
max. 200 mm, with a cutting depth of 40 mm to max. 70 mm and the minimum/maximum
base plate dimensions according to Figure 5.
To Next Page
Loading...
