To Next PageTo Next Page
Need help?Do you have a question about the Wolfcraft VLC 1000 and is the answer not in the manual?
General| Frame color | Aluminium, Black |
|---|---|
| Cutting angles | 90° |
| Frame material | - |
| Cutting width (max) | 370 mm |
| Laminate thickness (max) | 14 mm |
| Manual | Yes |
| Country of origin | European Union |
Read all safety information and instructions before use. Failure to comply can lead to injury.
Cutter is exclusively for cutting laminate, vinyl, and design floors without tools.
Mount limit stop to adjust cutting width from 210 mm to 370 mm.
Adapt gap width using cutter bars for different material thicknesses to minimize tearing.
Perform three-step cuts for material widths up to 210 mm at 90 degrees.
Make angled cuts at 45 degrees using the angle stop or freehand.
Execute rip cuts without the angle stop by aligning material against the blade.
Details on securing the cutter, cleaning, lubrication, and product dimensions.
Crucial guidelines for safe operation, handling, and storage of the appliance.
Information on the 10-year guarantee for DIY purposes and warranty claim procedures.
Contact information for wolfcraft GmbH, including service hotline and email.
List of international distributors with contact information for support and sales.
