Wolfcraft VLC 800 User Manual

l Original-Bedienungsanleitung
t Translation of the original operating instructions
p Traduction de la notice d'utilisation originale
n Traducción del manual de instrucciones original
L Vertaling van de oorspronkelijke handleiding
y Traduzione del manuale d’uso originale
M Tradução do manual original
m Oversættelse af den originale betjeningsvejledning
S Översättning av original bruksanvisningen
q Alkuperäisen käyttöohjeen käännös
K Oversettelse av original bruksanvisning
N Tłumaczenie oryginalnej instrukcji obsługi
v Μετάφραση του πρωτότυπου οδηγιών χρήσης
W Orijinal işletim kılavuzunun çevirisi
k Překlad originálního Návodu na obsluhu
w Az eredeti használati útmutató fordítása
P Traducerea instrucţiunilor de operare originale
e Превод на оригиналното упътване за употреба
x Prevod originalnog uputstva za upotrebu
r Перевод оригинала инструкции
по эксплуатации
6939 000
wolfcraft
®
GmbH
Wolff-Str. 1
D-56746 Kempenich
Germany
www.wolfcraft.com
VLC 800

Wolfcraft VLC 800 Specifications

General

Cutting Length	800 mm
Material	Aluminium
Cutting width max	465 mm
Weight	3500 g
Cutting material	Laminate, Vinyl

Summary

Necessary Assembly Tools

Assembly Instructions Overview

Step 1: Initial Assembly

Illustrates the initial steps for assembling the main unit and its components.

Step 2: Adjusting the Cutting Head

Details on adjusting the cutting head angle and positioning for precise cuts.

Step 3: Cutting Tiles

Demonstrates the process of cutting tiles using the device, including blade adjustments.

Advanced Cutting Techniques

Step 4: Angular and Rotary Cuts

Shows how to perform cuts at various angles, including 0-180 degrees.

Step 5: Cutting Small Pieces

Illustrates methods for cutting smaller tiles or pieces accurately.

Maintenance and Operation

Step 6: Cutting Long Strips

Details on cutting long strips of material, including specific measurements.

Step 7 & 8: Lubrication and Cleaning

Instructions for lubricating moving parts and general maintenance.

Product Specifications

Intended Use and Operation

Intended Use

Specifies the appliance's purpose and materials it can process.

Operating Instructions

Step-by-step guide for using the vinyl and laminate cutter.

Safety Instructions

Essential safety precautions to follow during operation and maintenance.

Guarantee Information