WOLFF SAMBA - Guarantee and Modifications; Guarantee; Replacement of parts, accessories and other modifications

Wol󰀨 GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 7062-91556-0 | Fax: +49 7062-91556-41 | www.wol󰀨-tools.de
24
9.0 Guarantee
The warranty period for new Wol󰀨 machines shall last for
one year from the point at which the machine is transfer-
red / delivered to the customer, insofar as statutory legal
requirements do not stipulate otherwise.
When validating warranty claims, the invoice or proof of
purchase must always be submitted.All repairs within the
framework of the warranty agreement must be undertaken
by a service Centre that has been accredited by us.
Customers performing their own repairs and/or improper
repairs regularly lead to the exclusion of warranty claims.
The same also applies to incorrect operation and/or use.
Replacement of parts, accessories and other modica-
tions to Wol󰀨 machines
Users of Wol󰀨 machines enjoy a high level of safety and
reliability of their machine. In order to maintain this status
quo, your Wol󰀨 tool may not be modied from the condition
in which it is delivered without following the rules below.
These rules apply to both the replacement of parts and
equipping the machine with accessories as well as other
technical modications.
 All work undertaken to your Wol󰀨 machine must be
undertaken exclusively by a workshop that has
suitably trained and experienced personnel at its
disposal, as well as the requisite work equipment.
We recommend using authorised service Centre.
 In the event of planned replacement of parts, planned
addition of accessories or other planned technical
modications, an assessment must always be carried
out by an authorised service Centre or us, as manu-
facturer, before work is commenced.
 It is highly recommend that only safety-approved
Original Wol󰀨 replacement parts and Original Wol󰀨
accessories are used, which have been approved by
us, as manufacturer. Replacement parts and acces
sories can be obtained from your authorised service
Centre, which will also be able to undertake professio-
nal installation on your behalf. Original Wol󰀨 replace
ment parts and Original Wol󰀨 accessories have been
checked for safety and suitability especially for Wol󰀨
machines.
We are unable to adequately assess the safety and
suitably of non-Original Wol󰀨 replacement parts.
 In order to preserve operational safety and to prevent
damage in the event of technical modications, of
whatsoever nature, our technical guidelines must
always be observed. We are also always happy to
hear from you should you have any other questions
about your Wol󰀨 machine.
Please note that we cannot accept any liability for
damage, insofar as this is sustained as the result of
incorrect work undertaken or as the result of violation
of the rules stated above.
Notes
EN