1
Wolverine MovieMaker Pro User Guide
Notice: Extra instructions and other details can be found in the manual provided with
the device.
Function of Buttons
Power button: Use to turn the device on or off.
Menu/Mode button: Use to go to the Menu/Mode screen or to back out of a
process (press button twice).
Up and Down arrow buttons: Used to navigate the menu/mode screen.
Enter/Start/Stop button: Use to select a highlighted item or start/stop a process.
Getting Started
1. Attach Power Cord: Plug in the included 12V power cord.
2. Insert a SD/SDHC Memory Card (max. 32 GB):
a. Confirm that the SD/SDHC card is unlocked (small tab is in upper
position).
b. Insert and push the SD/SDHC card inward into the SD card slot on the
back of the device until it clicks. Improper insertion may damage the card
reader or the SD/SDHC card.
c. To eject an SD/SDHC card, push the card in first to release it, then pull it
out. (Note: Ejecting an SD card will automatically power off the device, if it
has not been powered off already.)
Note: Micro SD cards (max. 32 GB) with an adapter are compatible with the
MovieMaker Pro.
To Next Page
Need help?
General
