Wolverine MovieMaker Pro Manual

How to Digitize an 8 mm or Super 8 Movie
With the Wolverine MovieMaker Pro
For more information, visit www.eapl.org/8mm
1. The MovieMaker Pro comes with an SD card inserted. Make sure it is securely in its slot; a properly
inserted SD card looks like this:
2. Plug in the MovieMaker Pro.
3. Put the appropriately sized empty reel on the right spindle. If you use the large reel place the
gray adaptor on the spindle first.
Gray Oversize Spindle
Adaptor on Right
SD Card Slot

Wolverine MovieMaker Pro Specifications

General

Type	Film Scanner
Storage	SD/SDHC card up to 32GB
Supported Film Types	8mm, Super 8
Output Format	MP4
Display	2.4" LCD