Thermostat: changing temperature setpoints
To increase the temperature setpoint, slide your finger upwards along the slider
towards the
icon.
To decrease the temperature setpoint, slide your finger downwards along the slider
towards the
icon.
The setpoint displays on the thermostat page.
Thermostat: changing temperature display
The default setting for temperature on the thermostat is °F. To change to °C:
1. Enter programming mode (page 57).
2. Press HOLD, then the
icon until the display reads 00 to select the Celcius
option, then press HOLD to save the new setting.
3. Press MODE to return to normal operation.
42
To Next Page
Loading...