Woods BACKHOE 1050 - Page 39

Parts 39
51861 (Rev. 6/16/2006)
BH1050 DIPPERSTICK & BUCKET ASSEMBLY
HARDWARE
REF PART QTY DESCRIPTION
1 34011 1 Dipperstick (includes items 2, 3, and
31)
2 34014 2 1-1/4 x 1-1/2 x 1-1/2 Tension bushing
3 34017 6 1 x 1-1/4 x 1-1/2 Tension bushing
4 34217 1 2-1/2 x 28 Hydraulic bucket cylinder
assembly (see page 51)
5 58012 1 12" Bucket (includes items 6 and 7)
-or-
5 58016 1 16" Bucket (includes items 6 and 7)
-or-
5 58018 1 18" Bucket (includes items 6 and 7)
-or-
5 58024 1 24" Bucket (includes items 6 and 7)
-or-
5 34205 1 36" Bucket (includes items 6 and 7)
6 34193 A/R Trencher shank assembly - crimp-on
style (includes item 7) -or-
6 D1055 A/R Tooth assembly 2.00 x 9.48, pin-on
style
7 30000 A/R Point weldment assembly, crimp-on
style -or-
7 HEX156 A/R Tooth point, pin-on style
8 34152 1 Bucket arm (includes item 3)
9 34154 2 Link weldment
10 30057 1 Pin pivot, dipperstick
11 34159 2 Pivot pin, bucket HT
12 34127 2 1 x 9.1 Pivot pin HT
13 34173 1 1-1/8 x 6-1/2 Pivot pin HT
14 34176 1 1 x 6-1/2 Pivot pin HT
15 62484 1 Socket, SMV emblem
16 62263 1 Bracket, SMV emblem
17 33374 2 Pivot pin retaining sleeve
18 34169 3 Hose clamp
REF PART QTY DESCRIPTION
30 3597 * - 1/8 X 1 Cotter pin
31 1972 * - 1/4 - 28 Tapered thread grease fitting
32 10378 * - 1/4 NC x 1 HHCS GR5
33 5336 * - 1/4 Standard flat washer
34 62521 - 1/4 NC Flanged hex lock nut
35 62532 - 5/16 NC x 1/2 Carriage bolt
36 11880 * - 5/16 x 1-3/4 Spirol pin
37 34178 - 5/16 x 2-3/8 Clevis pin HT
38 7164 * - 5/16 NC x 2-1/4 HHCS GR5
39 6778 * - 5/16 NC Hex lock nut
40 14139 - 5/16 NC Flanged hex lock nut
41 1863 - 1" SAE Flat washer
42 34181 - 2-1/2 x 3-1/2 Hose clamp
* Obtain locally
A/R As required
REF PART QTY DESCRIPTION