Woodstock SHOP FOX W1668 User Manual

***Keep for Future Reference***
W1848
W1668
MODEL W1668/W1848
13
1
⁄4" OSCILLATING
DRILL PRESS
#18837MN Printed in ChinaV3.10.22
OWNER'S MANUAL
(FOR MODELS MANUFACTURED SINCE 06/22)
Phone: (360) 734-3482 • Online Technical Support: techsupport@woodstockint.com
COPYRIGHT © MARCH, 2017 BY WOODSTOCK INTERNATIONAL, INC., REVISED OCTOBER, 2022 (CS)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Woodstock SHOP FOX W1668 Specifications

General

Brand	Woodstock
Model	SHOP FOX W1668
Category	Power Tool
Language	English

Summary

Introduction and Specifications

Woodstock Technical Support

Contact information for technical assistance and troubleshooting.

Machine Specifications

Detailed technical data for the W1668 and W1848 models.

Component Identification

Visual guide to the drill press's controls, features, and diagrams.

Controls & Components Description

Explanation of the function of each control and component.

Safety

Standard Machinery Safety Instructions

Essential safety guidelines for operating machinery safely.

Additional Safety for Drill Presses

Specific safety precautions tailored for drill press operation.

Electrical

Circuit Requirements

Specifications for the power supply circuit needed for the machine.

Grounding Requirements and Extension Cords

Guidelines for proper grounding and the use of extension cords.

Electrical Safety Instructions

Critical safety warnings and procedures for electrical work.

Wiring Diagram

Schematic illustrating the machine's electrical connections.

Setup

Unpacking and Items Needed

Steps for unpacking and listing necessary tools and materials.

Hardware Recognition Chart

Visual guide to identify hardware during assembly.

Inventory

List of parts included with the machine shipment.

Cleaning Machine

Procedures for removing rust preventative coating.

Machine Placement

Guidelines for selecting the operating location and clearances.

Mounting Options

Instructions for bench mounting (W1668) and floor anchoring (W1848).

Assembly Steps

Step-by-step guide to assemble the drill press.

Test Run and Spindle Break-In

Procedures for verifying operation and preparing the spindle.

Operations

General Operation and Table Adjustments

Overview of operations, table adjustments, and speed control.

Drilling Procedures and Speed Charts

Using depth stop, speed charts, and calculating spindle speed.

Changing Bits and Using Oscillator

Instructions for changing bits, drums, and using the oscillator.

Maintenance

Routine Maintenance and Cleaning

General maintenance schedule, cleaning, and protecting the machine.

Component Care and Lubrication

Belt inspection, lubrication, and rack maintenance.

Service

Service Procedures and Adjustments

Contacting support and adjusting feed spring and quill shaft.

Troubleshooting Common Problems

Solutions for motor, electrical, and operational issues.

Parts and Labels

W1668 Main Parts List

Illustrated list of replacement parts for the W1668 model.

W1848 Main Parts List

Illustrated list of replacement parts for the W1848 model.

Labels and Cosmetics

Information regarding machine labels and touch-up paint.

Warranty

Warranty Information and Registration

Details on product warranty and how to register it.