Need help?Do you have a question about the Woodward SPM-D10 and is the answer not in the manual?
General| Brand | Woodward |
|---|---|
| Model | SPM-D10 |
| Category | Recording Equipment |
| Language | English |
Emphasizes reading the entire manual and following safety precautions for installation, operation, and servicing.
Stresses the need for a separate overspeed shutdown unit for prime movers.
Details precautions for handling static-sensitive electronic controls.
Defines the WARNING, CAUTION, and NOTE symbols used in the manual.
Provides an overview of the unit's LEDs, push-buttons, and LC display.
Details the functions and indicators of the unit's LEDs.
Details the functions and operation of the unit's pushbuttons.
Explains display monitoring in automatic mode for voltage, frequency, and alarms.
Lists core functions like Synchronization, Synch-check, and Dead bus start.
Explains the designation format for different SPM-D models and their options.
Describes options like mounting, hardware variations, CTs, and voltage transformers.
Details precautions for handling static-sensitive electronic controls.
Advise to discharge body static and wear cotton clothing to prevent static buildup.
Keep plastic, vinyl, and Styrofoam materials away from the control unit.
Warns that opening the control unit voids the warranty; provides PCB handling precautions.
Mandates a circuit breaker and mentions interference suppressors for inductive devices.
Provides wiring diagrams for SPM-D10 and SPM-D10/X variants.
Covers reference point connection and details for 24 Vdc and 90-250 Vac/dc power supplies.
Explains connections for generator voltage and mains/busbar voltage measurements.
Details discrete inputs, their voltage limits, and relay outputs for control and messages.
Describes controller outputs for SPM-D10 and SPM-D10/X, including three-position and analog/PWM types.
To Next Page
