Why can't the switch panel be programmed on Woodway Opti-Link Control Systems?
If the switch panel on your Woodway Control Systems cannot be programmed, it's possible that the keypad lockout is still enabled. Disable the lockout to enable programming.
Why is a beeper heard when the door is opened on Woodway Control Systems?
If a beeper sounds when the door is opened on your Woodway Control Systems, it means the door switch has been connected, but the handbrake has either not been connected or has not been applied. If the door switch is connected, the handbrake must also be connected, as the beeper serves as a ‘handbrake off’ warning.
General| Brand | Woodway |
|---|---|
| Model | Opti-Link |
| Category | Control Systems |
| Language | English |
Provides information about the manual's purpose and limitations.
Details the function and connection of the keypad interface module.
Explains the output/receiver module's role in decoding data and activating outputs.
Details how to disable or enable the keypad's function lock.
Explains how to set buttons for self-cancelling functionality.
Describes how to change switch operation between latching and momentary.
Configuration for special strobe settings on switches 1 to 3.
Procedure to enable or cancel the external 999 input function.
Provides the general wiring layout for the Opti-Link system.
Diagrams for output/receiver and auxiliary equipment relay connections.
Details for hands-free control connections for Beta Siren amplifier.
To Next Page