6km/h setting
Use the button to enter the 6/Km/h function selection, press buttons to switch between ON/OFF. Default is
OFF. Kept press button 3s in the neutral, enter the 6Km/h rotation motor, when selecting the open.
6/Km/h function selection
Speed limit setting (SD)
Use the button to enter the speed limit selection, press or buttons to set the speed limit.
15-45. The default is 25Km/h.
Speed limit selection
Power setting (A)
Use the button to enter the power adjustment submenu, press or buttons to change (6-35)
The default is 16.
Power adjustment selection
Zone mode setting (M)
Use the button to enter the mold submenu, press button to switch between Japan and Europe. Default
is Europe.
To Next Page
Loading...