Worcester MT10RF

7
TRANSMITTER CONTROLS
FITTING & OPERATING INSTRUCTIONS
8-716-107-486d (12.06)
USER
INSTRUCTIONS

'

(

)

*

+

,
%


%
&
'
(
)
INFORMATION:
Slide open panel (A) to expose quick
reference user instructions (B).
SETTING THE 24 HOUR CLOCK:

Slide cover (D) off the transmitter
(C).
%
Rotate outer ring (E) in direction of
arrow (clockwise) until the clock hands
and the 24 hour pointer (F) display the
correct time.
-./--0-0/-123245#
0!06!07228--98/-
SETTING HEATING TIMES:
&
Using the 1 to 24 hour marks on the
outer ring (G) move the segments (H):
inwards for daytime setting.
outwards for night setting.
Note; each segment represents 15
minutes.
SETTING HEATING TEMPERATURE:
'
Rotate the dials (J) to set the room
temperature required:
5-30°C for daytime.
5-30°C for night time.
Typical day and lower night temperature
settings are shown opposite.
Frost protection is automatically set at
5°C.
SELECTING PROGRAMS:
(
Move the selector switch (K) to set:
automatic (uses day/night timer & both
temperature settings).
day override (continuously on using
day temperature setting).
night override (continuously on using
night temperature setting).
Replace cover (D) when finished.
TRANSMITTER CONTROLS
1
C
D
E
G
H
3
4
5
K
J
2
BA
F
J