9
BATTERY REPLACEMENT
FITTING & OPERATING INSTRUCTIONS
8-716-107-486d (12.06)
USER
INSTRUCTIONS
F
TO REPLACE THE BATTERIES:
Do not use rechargeable batteries.
Locate flat bladed screwdriver into
slots and twist to lift top of transmitter
(A) away from baseplate (B).
%
Remove existing batteries (C) and
dispose of safely, do not touch the
circuits inside the transmitter.
Replace batteries with the same
type (D) and check they are correctly
fitted to the transmitter (A).
&
Align outer edge and internal lugs
(F) of transmitter to baseplate (B)
and push fit to secure.
The receiver will revert back to normal
operation after the transmitter batteries
are successfully replaced.
BATTERY REPLACEMENT
3
B
D
A
C
A
B
2
1
To Next Page
Loading...
