LM-2 Bi-directional DMX / USB interface EN
• To work with Chamsys
©
:
1. Unzip the file D2XX.zip and copy the folder D2XX to the desktop. This package contains
3 different builds of the D2XX driver, located in the following subdirectories:
• D2XX/bin/10.3: PPC version compatible with 10.3.x (Panther)
• D2XX/bin/10.4-10.5: Intel x86 and PPC universal binary compatible with OS X 10.4
(Tiger) and OS X 10.5 (Leopard)
• D2XX/bin/10.6: Intel x86 and Intel x86_64 binary compatible with 10.6.x (Snow
Leopard)
2. Install the library. Installing the library is a relatively simple operation which involves
copying a file and making a simbolic link. Use the following steps to install:
i. Open a terminal window (Finder → Applications → Utilities → Terminal)
ii. If the /usr/local/lib directory does not exist, create it (sudo mkdir /usr/local/lib)
iii. If the /usr/local/include directory does not exist, create it (sudo mkdir
/usr/local/include)
iv. Copy the dylib file to /usr/local/lib (sudo cp Desktop/D2XX/bin/the required
subdirectoy depending on your MAC OS (as seen before)/libftd2xx.0.1.7.dylib
/usr/local/lib/libftd2xx.0.1.7.dylib)
v. Make a symbolic link (sudo ln -sf /usr/local/lib/libftd2xx.0.1.7.dylib
/usr/local/lib/libftd2xx.dylib)
vi. Copy the D2XX include file (sudo cp Desktop/D2XX/Samples/ftd2xx.h
/usr/local/include/ftd2xx.h)
vii. Copy the WinTypes include file (sudo cp Desktop/D2XX/Samples/WinTypes.h
/usr/local/include/WinTypes.h)
viii. You have now successfully installed the D2XX library.
3. Connect the LM-2 to an USB port in the computer.
4. Remove the USB connection and connect it again after few seconds in order to finish the
installation process. (This step is only necessary the first time)
• To work with Arkaos
©
:
1. Follow steps 1 and 2 of Chamsys configuration.
2. Run the file LM-2 Installer.pkg
3. Follow steps 3 and 4 of Chamsys configuration
LM-2 User Manual / Manual de Usuario Pag4
To Next Page
Loading...
Need help?
General