Need help?Do you have a question about the Work Pro NEO S8 A and is the answer not in the manual?
Terminals for speaker wire accepting a stereo speaker level, full range signal from a power amplifier.
Euroblock 3-pin connectors for a balanced line full range signal from pre-amplifier output or mixer.
Rotary control to adjust subwoofer level for balancing volume with main stereo speakers.
Rotary control for variable low pass filter, setting upper frequency from 50 Hz to 150 Hz.
Connects AC 10-120/220-240V supply via Schucko-IEC cable; power switch controls status.
Allows selection of mains input supply between 115 V AC and 230 V AC.
Guidance on positioning the subwoofer in a listening room to manage room acoustics and standing waves.
Steps for initial setup including crossover frequency, gain, and program material selection.
Procedure to rotate the level control for a good balance between subwoofer and main speakers.
Adjusting the crossover frequency for optimal blend, avoiding boominess and unnatural sound.
Details on line input impedance, max input level, and power output.
Information on Max. SPL, frequency response, and crossover frequency range.
Specifications for material, dimensions, and weight of the subwoofer.
Diagram and explanation for connecting the subwoofer using high-level inputs from front speakers.
Diagram and explanation for connecting the subwoofer using balanced line inputs from a mixer or amplifier.
To Next Page
General