13
All-in-One Blower/Vac/Mulcher EN
PLUG REPLACEMENT (UK &
IRELAND ONLY)
If you need to replace the fitted plug then follow
the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colors of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows. The wire which is coloured
blue must be connected to the terminal which is
marked with N. The wire which is coloured brown
must be connected to the terminal which is marked
with L.
Warning:
Never connect live or neutral wires to the earth
terminal of the plug. Only fit an approved BS1363/A
plug and the correct rated fuse.
Note: If a moulded plug is fitted and has to be
removed take great care in disposing of the plug
and severed cable, it must be destroyed to prevent
engaging into a socket.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description Blower Vacuum
Type WG505E(5-designation of machinery,
representative of Electric Blower Vacuum)
Function blowing and picking up debris into a
debris collector
Complies with the following Directives:
2006/42/EC
2014/30/EU
2011/65/EU
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per
Annex V
- Measured Sound Power Level 106,7 dB(A)
- Declared Guaranteed Sound Power Level
110dB(A)
Standards conform to
EN 60335-1
EN 50636-2-100
EN ISO 3744
EN 62233
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2017/11/03
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
To Next Page
Loading...