9
All-in-One Blower/Vac/Mulcher EN
source and disconnect the
machine from supply before
cleaning debris.
j) Never operate the machine
with defective guards or
shields, or without safety
devices, for example debris
collector in place.
k) Keep the power source
clean of debris and other
accumulations to prevent
damage to the power
source or possible fire.
l) Do not transport this
machine while the power
source is running.
m)Stop the machine, and
remove plug from the
socket. Make sure that all
moving parts have come to
a complete stop
- whenever you leave the
machine,
- before clearing blockages or
unclogging chute,
- before checking, cleaning or
working on the machine.
n) Avoid using the machine
in bad weather conditions
especially when there is a
risk of lightning.
4) Maintenance and storage
a) keep all nuts, bolts and
screws tight to be sure the
appliance is in safe working
condition;
b) Check the debris collector
frequently for wear or
deterioration.
c) Replace worn or damaged
parts.
d) Use only genuine
replacement parts and
accessories.
e) Store the machine in a dry
place out of the reach of
children.
f) When the machine is
stopped for servicing,
inspection, or storage, or
to change an accessory,
shut off the power source,
disconnect the machine
from the supply and make
sure that all moving parts
are come to a complete
stop. Allow the machine
to cool before making any
inspections, adjustments,
etc. Maintain the machine
with care and keep it clean.
g) Store the machine in a dry
place out of the reach of
children.
h) Always allow the machine
to cool before storing.
i) When servicing the
shredding means be aware
that, even though the power
source is switched off due
to the interlock feature of
the guard, the shredding
means can still be moved.
j) Never attempt to override
the interlocked feature of
the guard.
5) Additional safety
instructions for units with
bagging attachments
Switch-off the machine
before attaching or
removing the bag.
To Next Page
Loading...