WORK HERO 10L DRY CANISTER 7
8. Replace the canister lid (with the power cord facing the
opposite direction of the hose inlet) and connect the
latches.
9. Insert the hose connector into the hose inlet and turn
clockwise until it locks securely onto the machine.
10. This machine is equipped with a short cable and
plug and a cord restraint. It needs to be used with an
extension cord.
11. Connect extension cord to the Cable Restraint. Feed the
loop up through Cable Restraint opening. Place extension
cord over the top of the Cable Restraint hook. Pull down
on the extension cord to lock the cord onto the hook.
12. Connect the extension cord to the mains power supply
and start the cleaner by pressing the On/O button.
NOTE: Always ensure that the cloth lter and the inlet
lter are tted in the cleaner before it is used.
To Next Page
Loading...
