WORK HERO 10L DRY CANISTER 9
MAINTENANCE
ATTENTION: DISCONNECT FROM MAINS POWER SUPPLY BEFORE DOING ANY
MAINTENANCE WORK.
If proper care is taken to maintain your cleaner, motor maintenance is unnecessary.
However we recommend that your cleaner is serviced once a year.
Cleaning Filter and Tank
1. Release the connection latches to unlock the lid from
the base.
2. Remove the cloth lter. Empty the tank and clean
thoroughly.
3. Twist the locking knob with an anti-clockwise force to
remove the inlet lter.
Note: Wash and clean the cloth lter using
lukewarm water. Please ensure that the cloth
lter is completely dry before retting.
4. Ret the inlet lter and cloth lter.
5. Return the barrel to the tank and fasten connection
latches.
To Next Page
Loading...
