The Work Hero D10LP is a 10L dry canister vacuum cleaner designed for commercial and light industrial use, ideal for environments such as motels, hotels, restaurants, cafes, garages, workshops, and schools.
Function Description:
The D10LP is a dry canister vacuum cleaner intended for picking up dry debris and dust from various surfaces. It is equipped with a combination floor tool suitable for both carpets and hard floors, and a 2-in-1 cleaning tool for furniture, curtains, and upholstery. The vacuum operates by drawing air and debris through a hose, into a tank, and through a cloth filter and inlet filter, trapping the dirt while expelling clean air.
Important Technical Specifications:
- Capacity: 10 liters (dry canister)
- Filter System: Cloth filter and inlet foam filter
- Accessories:
- Three-piece metal tube
- Hose with handle
- Combination floor tool
- 2-in-1 cleaning tool (crevice tool/dusting brush)
- Power Supply: Must be connected to an AC power supply at the voltage shown on the rating label.
- Power Cord: Short cable with a plug and cord restraint, requiring an extension cord for use.
- Wheels: Equipped with both large and small wheels for mobility, with specific "R" and "L" markings for installation of the large wheels.
Usage Features:
- Assembly:
- Connect the three-piece metal tube.
- Connect the handle to the tube.
- Connect the tube to either the combination floor tool or the 2-in-1 cleaning tool.
- Disconnect latches and remove the canister lid to access and remove accessories from inside the tank.
- Fit the wheel cover to the wheel base by pushing down.
- Fit the large wheels to the base of the tank, securing them with included screws according to "R" and "L" markings.
- Fit the small wheels to the base of the tank by pushing down.
- Replace the canister lid, ensuring the power cord faces the opposite direction of the hose inlet, and connect the latches.
- Insert the hose connector into the hose inlet and turn clockwise to lock it securely.
- Connect an extension cord to the cable restraint: feed the loop through the opening, place the cord over the hook, and pull down to lock it.
- Connect the extension cord to the mains power supply and start the cleaner using the On/Off button.
- Operation:
- Always ensure the cloth filter and inlet filter are fitted before use.
- Ideal for dry household use only; not designed for picking up water or liquids.
- The combination floor tool is versatile for both carpeted and hard floors.
- The 2-in-1 cleaning tool is suitable for delicate surfaces like furniture, curtains, and upholstery.
- Safety Precautions:
- Always switch off and unplug the cleaner from the mains power supply before cleaning, maintenance, or when not in use.
- Do not operate near heaters, radiators, or hot surfaces.
- Ensure hands are dry before inserting the plug.
- Remove large or sharp objects from the cleaning surface to prevent filter damage.
- Pull the plug, not the power cable, when disconnecting from the power socket.
- Do not use the power cable as a handle or pull it around sharp edges.
- Do not operate with wet hands.
- Exercise caution when using on stairs.
- Do not change attachments while plugged in; always switch off and unplug first.
- Use only manufacturer-recommended accessories.
- Do not pick up flammable or combustible items (petrol, hot ashes, cigarettes, matches, explosive materials) or toxic materials (chlorine bleach, ammonia).
- Never operate without the dust bag and/or filters in place.
- If the air inlet, floor head, or telescopic tube are blocked, switch off, unplug, and clear the obstruction before restarting.
- Hold the plug when rewinding onto the cord reel to prevent injury.
- Do not extend the power cable beyond the yellow mark.
- Do not leave unattended when connected to power.
- Keep hose ends and other openings away from face and body.
- Do not use if damaged or broken; check electrical components regularly.
- Never clean electrical parts with water or liquid cleaners.
- Do not attempt electrical modifications.
- Store indoors in a cool, dry place.
- Damage from improper use or not observing instructions will void the warranty.
- Troubleshooting:
- Suction weakens or cleaner runs hot:
- Clogged Filter: Brush dirt from the filter; if condition persists, change the filter.
- Air Leak: Check all fittings (floor tool, hoses, etc.) for a tight fit and ensure the tank lid is sealed properly.
- Obstruction in hose or floor tool: Check for and remove any obstructions.
Maintenance Features:
- General Maintenance:
- Disconnect from mains power supply before any maintenance work.
- Regular care and maintenance are recommended to prolong the life of accessories and consumables.
- Annual servicing is recommended, though motor maintenance is generally unnecessary with proper care.
- Cleaning Filter and Tank:
- Release connection latches to unlock the lid from the base.
- Remove the cloth filter.
- Empty and thoroughly clean the tank.
- Twist the locking knob anti-clockwise to remove the inlet filter.
- Wash and clean the cloth filter using lukewarm water. Ensure it is completely dry before refitting.
- Refit the inlet filter and cloth filter.
- Return the barrel to the tank and fasten connection latches.
- Spare Parts:
- Cloth Filter: Part Number 33400184
- Inlet Foam Filter: Part Number 32200840
- Hose Assembly with Handle: Part Number 31220454
- Rod 3pc Stainless Steel: Part Number 31300568
- Rear Wheel: Part Number 33500394
- Latch: Part Number 33701753
- For customer service or product inquiries, contact 1800 815 270 (AUS) or 0800 282 288 (NZ).
Warranty:
The cleaner comes with a three-month parts and labor warranty for domestic use against product defects and failures, provided it is used according to the instruction manual. The warranty starts from the original purchase date and is non-transferable. Proof of purchase is required for all warranty claims. The warranty is valid only in the country of purchase. It does not cover vitreous building materials, particle board, construction products (wood/fibres, cement, fillers, fiberglass), or excessive/frequent sand collection, which may void the warranty. Accessories and consumables (dust bags, filters) are not covered unless defective in manufacture. The warranty does not cover normal wear and tear, alterations, improper installation, physical abuse, misuse, or accidental damage. Transportation costs for defective parts are borne by the claimant. Repair under warranty does not extend the original warranty period. The benefits of this warranty are in addition to other rights and remedies under consumer law.
To Next Page
General