OPERATION (continued)
1. To remove the lid assembly to empty
contents of the dust drum, simply lift
the two drum latches on the side of
the Vac and lift the lid assembly up
and off the dust drum and set to the
side.
2. Lay the Lid and detachable blower
assembly upside down on a clean dry
area while emptying the drum or
changing the filter.
3. Dump the drum contents into the
proper waste disposal container.
Emptying the Drum
Blowing Feature
Your Wet/Dry Vac has a “detachable
blower.” It has the capability to be used as
a dedicated blower for yard work, patio
cleanup, and garage applications to blow
dust and other debris.
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a Blower.
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
C
AUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended hours or when using in a
noisy area.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
!
!
!
!
10
1. Familiarize yourself with the
detachable blower portion of your
Wet/Dry Vac.
2. Remove the detachable blower of your
Vac by pressing down on the
detachable blower latch under the
handle of the detachable blower and
lift by the handle to remove.
SP6913-1 Workshop 4 Gallon.qxp_SP6439-3_ES.qxd 7/15/14 6:42 AM Page 10
To Next Page
Loading...
Need help?
General
