WORKZONE TITANIUM PAP110 - Troubleshooting; Common Faults and Solutions

Air Compressor
AFTER SALES SUPPORT
(toll free)MODEL No.: PAP110 • 02/2019 63569
e-mail: info.aldi@positecgroup.com
AUS
20
1300 889 028
AUS
Troubleshooting
Fault Possible cause Remedy
The air compressor
does not start.
No supply voltage.
Insufficient supply
voltage.
Outside temperature
is too low.
Motor is overheated.
Check whether the
power plug is connected
to the power supply.
Check whether the
input supply voltage is
correct.
Wait until the outdoor
temperature is normal.
Wait until the motor
temperature is normal
The air compressor
starts but there is no
pressure.
The non-return valve
leaks.
Check whether the
sealing performance of
valve is normal.
Troubleshooting