General information
7
General information
Reading and storing the assembly instructions
These assembly instructions accompany this tool chest and rolling tool
cabinet (hereafter referred to as the “cabinet”), and contain important
information on setup and handling.
Before using the cabinet, read the assembly instructions carefully. This
particularly applies to the safety instructions. Failure to do so may result in personal
injury or damage to the cabinet.
Store the assembly instructions for further use. Make sure to include these assembly
instructions when passing the cabinet on to third parties.
Proper use
The cabinet is exclusively designed for storing tools and supplies with a maximum
load of 61.37 kg. It is only intended for private use and not suitable for commercial
purposes.
Only use the cabinet as described in these assembly instructions. Any other use is
considered improper and may result in damage to property or persons.
The manufacturer or vendor cannot be held liable for damages or injury incurred
through improper or incorrect use.
Explanation of symbols
The following symbols and signal words are used in these assembly instructions, on
the cabinet or on the packaging.
This symbol provides you with useful additional information on
handling and use.
To Next Page
Loading...
Need help?
General