17
140AMP Inverter Welder
01904 727506 www.coreservice.co.uk
GB
01247 5150
IRE
AFTER SALES SUPPORT
MMA-140 76597 09/2017
Controls
Controls
Current adjust
Adjust this knob to set
output current.
Welding current display
The digital display shows
the welding current.
Over temperature indicator
When the indicator lights yellow. This indicates
that the duty cycle of the machine has been
exceeded. Allow the unit to cool for 20 minutes
to reset before resuming welding.
Power indicator
This indicator lights green means
power is on.
To Next Page
Loading...