What to do if the over temperature indicator is on and there is no output current in Workzone MMA-140 Welding System?
If the over temperature indicator is on and there's no output current in your Workzone Welding System, it likely means you've exceeded the unit's duty cycle. To resolve this, allow the unit to cool down for about 20 minutes.
How to troubleshoot Workzone Welding System when power indicator is not lit, fan does not work and there is no output current?
If the power indicator isn't lit, the fan isn't working, and there's no output current from your Workzone Welding System, first ensure the unit is properly plugged into a working 240V mains outlet and switched on. Next, check if the mains fuse or breaker has tripped. Finally, verify that the main switch on the rear of the unit is in the 'on' position.
What to do if Workzone Welding System power indicator is lit, fan works, but there is no output current?
If your Workzone Welding System's power indicator is lit and the fan is working, but there's no output current, start by checking that the welding cables are correctly connected. Then, inspect the output connectors for any disconnections or damage. Lastly, make sure the earth clamp is securely connected to the workpiece, ensuring the contact point is free from paint or rust.
Why is the output current not stable on my Workzone MMA-140?
If the output current of your Workzone Welding System is unstable, you should check that the mains voltage is constant. Also, check that the welding cable connectors are tight in the sockets. Make sure the earth clamp has a secure connection to the workpiece and that the welding leads are not reversed.
Designed for home/garage repairs and DIY. Suitable for 1.6-3.2mm electrodes.
User responsibility, fire risk, work area, training, and handling precautions.
Workpiece heat, welding surfaces, avoid flammables and coated materials.
Ventilate work area, avoid electrical contact, no-load voltage hazards.
Wear welding mask, gloves, protective clothing. Use safety glasses and screen others.
Precautions for electric shock risk, confined spaces, flammable materials, and raised positions.
Explanation of warnings for manual, electrical hazards, fumes, and containers.
Designed for home/garage repairs and DIY. Suitable for 1.6-3.2mm electrodes.
User responsibility, fire risk, work area, training, and handling precautions.
Workpiece heat, welding surfaces, avoid flammables and coated materials.
Ventilate work area, avoid electrical contact, no-load voltage hazards.
Wear welding mask, gloves, protective clothing. Use safety glasses and screen others.
Precautions for electric shock risk, confined spaces, flammable materials, and raised positions.
Explanation of warnings for manual, electrical hazards, fumes, and containers.
General| Input Voltage | 230V |
|---|---|
| Output Current Range | 20-140 A |
| Weight | 4.5 kg |
| Electrode Diameter Range | 1.6 - 3.2 mm |
| Protection Class | IP21S |
| Type | MMA |
| Duty Cycle at | 60% |
To Next Page