GB IRE
GB
0845 872 2740
IRE
019022605
− Never attempt to clean the rotary hammer drill by immersing it
in water and do not use a steam cleaner to clean it. Otherwise
you could damage the rotary hammer drill.
− Stop using the rotary hammer drill if its plastic parts exhibit
cracks or breaks or are deformed. Only have a qualified work-
shop replace damaged parts with corresponding original
spare parts.
CAUTION!
Burn hazard!
Both the tool and the work pieces can become hot during drilling.
− Protect your hands and wait before you continue working
until the tool and the work pieces have cooled off.
NOTICE!
Risk of damage!
Supply lines in the wall, e.g. for power, gas and water, could be
damaged while drilling and damage the drill bit and rotary hammer
drill as a result.
− Before drilling, check the work area where you intend to drill
for lines of any kind. Use a suitable device such as a metal
detector or electrical line detector for this. In case of doubt,
consult a professional or the supplying utility.
First use
Checking the rotary hammer drill and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointy object, you may quickly damage the rotary
hammer drill.
− Be very careful when opening.
To Next Page
Loading...