11
Frequently Asked Questions(FAQ)
WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorized service centre or a similarly qualified specialist if you
cannot solve the problem yourself!
Suspected malfunctions, disturbances or damages are often due to causes that
the user can find themselves. Therefore check the product using this section. In
most cases the problem can be solved quickly.
Symptom Problem Solution
No pressu-
re or fluid
nozzle
Unit not properly primed.
Blocked water inlet screen.
Kink in water inlet hose.
Closed water supply.
Prime unit.
Clean or replace inlet screen.
Remove kink.
Turn on water supply. Check sup-
ply hose for leaks or blockage.
Low nozz-
le pres-
sure
Unit not properly primed.
Insufficient inlet water
supply
Kink in water inlet hose
Worn pump components
Prime unit.
Check water supply conditions.
Clean inlet screen.
Check with service agent.
Appliance
does not
start
Not connected to power
supply
Power connection is loose.
Switch malfunction
Faulty motor
Connect with power supply.
Connect the unit with power.
supply well
Check with service agent.
Check with service agent.
FAQ
To Next Page
Loading...