EasyManuals Logo

Workzone Q1W1524 User Manual

Workzone Q1W1524
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
parts from the manufacturer or approved by the
manufacturer.
WARNING: High pressure hoses, fittings and couplings
are important for the safety of the appliance. Use only
hoses ,fittings and couplings recommended by the
manufacturer.
Do not use the appliance if a supply cord or important
parts of the appliance are damaged, e.g. safety devices,
high pressure hoses , trigger gun.
If an extension cord is used, the plug and socket must
be of watertight construction. The cross-section of the
power supply cable must not be less than 2x2.5mm
2
. Do
not abuse extension cord and do not yank on any cord to
disconnect.
Do not operate the appliance when fatigued or under
the influence of alcohol or drugs.
Do not stand on unstable surfaces. Keep good footing
and balance at all times.
Spray gun can kick back .Hold with both hands on the
appliance.
When the spray trigger is released, water pressure is
trapped in the discharge hose. Release trapped pressure
by triggering the spray gun after the washer is turned off.
To reduce the risk of electrocution, keep all connections
dry and off the ground. Do not touch plug with wet
hands.
Disconnect from the electrical power supply before
carrying out user maintenance.
Store the appliance in a dry place and out of reach of
children.
Assembly and parts list

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Workzone Q1W1524 and is the answer not in the manual?

Workzone Q1W1524 Specifications

General IconGeneral
BrandWorkzone
ModelQ1W1524
CategoryUltrasonic Jewelry Cleaner
LanguageEnglish