16
16
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
TRD18MA.9 • 8307 • 06/2019
9.6 Bluetooth
The performance of the Bluetooth system depends on the brand
and the model of your device to be connected.
Compatibility with all types of devices is not ensured. To get the
best effect from transmission of data via Bluetooth, the distance
between the two devices must not exceed 8 m, and there must
be an open path between the radio and the bluetooth device. An
obstacle (for example, a wall of cement, a person or heavy furniture
etc.) between the devices can reduce the minimum distance of
connection or influence the performance of data transmission. In
this case, you can reset your device in position closer to the radio.
First, you should familiarize yourself with the function and method
of using the Bluetooth of your device.
1. Activate the Bluetooth function on your device (mobile phone,
iPod, computer etc).
You can refer to the manual of your device.
2. Place your Bluetooth device close to the radio. The distance
should not exceed 1 m.
3. Press
to turn on the unit.
4. Press
to enter the BLUETOOTH mode. is flashing on the
Upper left of the LCD screen (2). The word BLUETOOTH is
displayed in the middle of the LCD screen (2).
5. Select ‘TRD18-radio’ on your device.
6. The connection can be established in a few seconds.
stops
flashing with a sound of «quick beep» . This means that the two
devices are properly connected. Now you can listen to music
from your own device with the speaker of the jobsite radio.
7. Turn the volume adjustment knob (10) to adjust the volume.
Turn the tune adjustment knob (11) to change the song.
To Next Page
Loading...