Workzone WWPBS-18 User Manual

ny
Using
the
bandsaw
Securing
the
workpiece
*
Open
the
vise
fixing
knob SEB.
*
Place the
workpiece
in
the stand
vise
and
push
the
vise
tight against
the
workpiece.
*
Tighten
the vise
fixing
knob to
secure
the
workpiece
in
place.
Using
the
bandsaw
Mains
connection
Ensure that
the
local
mains
voltage agrees
with the
information
on
the
bandsaw’s
rating
label.
The bandsaw
is
designed
for
use with
single-phase
alternating
current
230-240 V
AC /
50 Hz and
is
double-insulated.
If the
work
area is
not
close to
the
mains
outlet,
an
extension
cable
with
a
sufficient
conductor cross
sectional area
(min.
1.5
mm2)
must be
used.
The
extension cable
used
should beas
short as
possible.
Always
ensure that
any
extension
cord used
is
fully
unwound to
avoid a risk
of
overheating.
15

Workzone WWPBS-18 Specifications

General

Brand	Workzone
Model	WWPBS-18
Category	Saw
Language	English