Need help?Do you have a question about the Worlde EASYCONTROL and is the answer not in the manual?
Power| power supply | USB bus power mode |
|---|---|
| current consumption | 100 mA or less |
Ports & interfaces| connectors | USB connector (mini B type) |
|---|
Weight and Dimensions| width | 13.4 inches / 340 mm |
|---|---|
| depth | 3.9 inches / 100 mm |
| height | 0.8 inches / 20 mm |
| weight | 14 oz / 445 g |
Lists key features of the WORLDE EASYCONTROL MIDI controller, including knobs, sliders, buttons, and connectivity.
Explains MIDI control groups, including knobs, sliders, and buttons for transmitting MIDI messages.
Details the six transport buttons and their function in transmitting MIDI or MMC messages.
Describes the two assignable buttons for MIDI CC switches or Note messages.
Explains the bank buttons used to switch between parameter assignment banks.
Specifies the necessary hardware and operating system requirements for using the controller.
Details how to connect the EASYCONTROL to a computer via USB for power and data.
Describes specific controls like program change knob, settled message buttons, and master volume slider.
Configures global MIDI channels for note, transport, and group messages.
Settings for knobs, including enable/disable, CC number, and value ranges.
Settings for sliders, including enable/disable, CC number, and value ranges.
Configures assignable buttons for MIDI CC, Note, or no assignment, including behavior.
Sets up transport buttons with CC, MMC messages, and button behavior options.
To Next Page