3.13. MTC
ü Press EDIT button to enter keyboard multi-function mode, and then press MTC to
open/close sending MTC message (F8).
3.14. ACTIVE SENSING
ü Press EDIT button to enter keyboard multi-function mode, and then press ACTIVE
SENSING to open/close active sensing message (FE). (KS49A/61A)
3.15. LOCK
ü Press EDIT button to enter keyboard multi-function mode, and then press LOCK to
open/close lock function. No other controllers except keyboard can be operated
under Lock mode. (KS49A/61A)
3.16. MUTE
ü Press EDIT button to enter keyboard multi-function mode, and then press MUTE to
open/close mute function. No message will be transmitted under Mute mode.
3.17. SNAP SHOT
ü Press EDIT button to enter keyboard multi-function mode, and then press SNAP
SHORT, DATA +/-, SLIDER, WHEEL, PEDAL, R1~R4 and R5~R8 and etc all
together to transmit those data at one time.
3.18. UPLOAD/DOWNLOAD
ü Use USB port to connect with computer can upload or download user parameters: to
upload KS25A/49A/61A panel parameters to computer, or, to download the
parameters from computer to KS25A/49A/61A.
ü The transmit messages are system exclusive messages in form of F0……F7.
According to different sequencer software, there are different ways to receive/send
system message: mainly record/playback style and system message window style.
Details are as follows.
l Record Style. E.g. Cubase
² From KS25A/49A/61Ato computer (UPLOAD)
1. Use USB cable to connect computer and KS25A/49A/61A;
To Next Page
Loading...
