the resistance curve value to initial 64.
ü When the dials （R1~R4 or R5~R8）are assigned as PA CURVE or PB CURVE, they
can be used to adjust pedal resistance value.
ü Press EDIT button to enter keyboard multi-function mode, press PA CURVE or PB
CURVE multi-functional keys to enter pedal resistance curve adjustment mode, input
the pedal resistance value with numeric pad, then press ENTER to confirm.
(KS49A/61A)
3.5. TEMPO
ü When DATA +/- is assigned as TEMPO, it can be used to adjust tempo. Press DATA
+/- at the same time to set the tempo to initial 100.
ü When the dials (R1~R4 or R5~R8) are assigned as TEMPO, they (R1~R4 or R5~R8)
can be used to adjust tempo.
ü Press EDIT button to enter keyboard multi-function mode, press TEMPO to enter
tempo adjustment mode, then input the tempo value with numeric pad, and press
ENTER to confirm. (KS49A/61A)
3.6. PROGRAM
ü When DATA +/- is assigned as PROGRAM, DATA +/- can be used to adjust program.
Press DATA +/- at the same time to set the program number to initial 0.
ü When the dials（R1~R4 or R5~R8）are assigned as PROGRAM, they（R1~R4 or
R5~R8）can be used to adjust program.
ü Press EDIT button to enter keyboard multi-function mode, press PROGRAM button to
enter program adjustment mode, then input the program number with numeric pad
and press ENTER to confirm.
3.7. MIDI CHANNEL
ü When DATA +/- is assigned as CHANNEL, use DATA +/- to adjust general MIDI
channel. Press DATA +/- buttons at the same time to set general MIDI channel to
initial 0.
ü When dial R1~R4 or R5~R8 are assigned as CHANNEL, use dial R1~R4 or R5~R8
to adjust general MIDI channel.
ü Press EDIT button to enter keyboard multi-function mode, and then press CHANNEL
to enter channel adjustment mode, and then use numeric pad to enter general MIDI
channel number and press ENTER to confirm.
ü Press EDIT button to enter keyboard multi-function mode, and then press CHANNEL
to enter channel adjustment mode. Operate the desired dial from R1~R4 or R5~R8 to
select that dial, and then use numeric pad to enter the channel number of that dial in
current group, and press ENTER to confirm.
To Next Page
Loading...
