To Next PageTo Next Page
Need help?Do you have a question about the Worldlawn DIAMONDBACK WYDB48FR691V32 and is the answer not in the manual?
Explains the meaning and usage of the safety alert symbol.
Emphasizes operator training and terrain evaluation before operation.
Warns about high sound levels and the need for hearing protection.
Details precautions for refueling, fuel storage, and handling gasoline safely.
Warns about hot engine parts and carbon monoxide hazards.
Outlines general safe practices like using daylight, checking controls, and avoiding hazards.
Warns about entanglement with rotating parts and the need for guards.
Provides guidance and warnings for operating on slopes.
Explains the importance and usage of the ROPS.
Instructions on keeping decals legible and identifying their meaning.
Lists model numbers and physical dimensions of the mower.
Details engine type, fuel capacity, and fuel filter specifications.
Covers electrical system, transmission type, and cutting deck dimensions.
Provides tire sizes and recommended pressures.
Explains motion control levers and the safety interlock system.
Describes the function and operation of choke, throttle, and park brake levers.
Details the fuel shut-off valve and ignition switch operations.
Explains the digital console display and service alert functions.
Guides on entering the key code to unlock and start the mower.
Instructions on how to change or set a new key code.
Procedures for setting the clock on the digital console.
Explains console service alerts and drive wheel release valve function.
Instructions on fueling, octane requirements, and ignition switch use.
Covers blade engagement switch and deck lift pedal operation.
Step-by-step guide for starting the engine and engaging the blades.
Instructions on how to safely disengage the cutting blades.
Procedures for stopping the engine and basic driving guidance.
Explains how to drive the machine forward and in reverse.
Details how to adjust the mower deck cutting height.
Explains how to adjust the anti-scalp rollers for optimal performance.
Guidelines for safely transporting the mower on a trailer or truck.
Instructions and warnings for loading the mower onto a transport vehicle.
Essential safety steps before performing any maintenance or adjustments.
Lists maintenance tasks required before use or after specific initial hours.
Outlines maintenance tasks based on 40, 100, 200, 250, 400, and 500-hour intervals.
Specifies tasks to be performed monthly and yearly.
Procedures for checking and maintaining the engine oil level.
Guide on checking battery voltage and charging recommendations.
Detailed instructions and safety precautions for jump starting the mower.
Instructions for inspecting, sharpening, or replacing mower blades.
Procedures for verifying the proper operation of safety interlock switches.
Checks for Rollover Protection Structure, seat belt, and loose hardware.
Maintenance procedures for air cleaner, engine oil, and oil filter.
Procedures for checking hydraulic oil, tire pressure, and belt condition.
Maintenance for caster wheel rotation and spark plug checks.
Step-by-step guide for changing hydraulic system filter and fluid.
Instructions for purging air from the hydraulic system.
Information on using thread locking adhesives and anti-seize.
Procedures for checking V-belts and lubricating grease fittings.
Details on pre-load and lubrication for caster pivot bearings.
How to adjust the mower deck for proper leveling.
Instructions for adjusting the mower deck drive belt tension.
Steps for adjusting the park brake system.
Detailed steps for adjusting the motion control linkage for neutral positioning.
Adjusting neutral settings and motion control handle height.
Adjusting the pivot for desired motion control lever resistance.
How to clean debris from the engine and exhaust system.
Instructions for cleaning the machine body and under the deck.
Common causes and solutions for the engine not starting.
Identifies potential causes for the engine running rough.
Addresses issues like weak engine, overheating, and battery charging.
Solutions for slow movement, deck engagement, and uneven mowing results.
Steps to prepare the mower for winter or long-term storage.
Illustrates the electrical wiring for the Diamondback model.
Shows the electrical wiring schematic for the Diamondback XL.
Depicts the electrical wiring for the Diamondback Maxx.
Illustrates the electrical wiring for the Diamondback XE model.
Details owner's rights and responsibilities under the warranty.
Explains warranty coverage for evaporative emission parts and defect requirements.
Outlines general warranty terms, conditions, exclusions, and exceptions.
Information on obtaining warranty service and the duration of coverage.
General| Category | Lawn Mower |
|---|---|
| Engine | Kawasaki FR691V |
| Displacement | 726 cc |
| Cutting Width | 48 inches |
| Deck Material | Steel |
| Blades | 3 |
| Transmission | Hydro-Gear ZT-2800 |
| Wheel Size (Rear) | 20 inches |
| Wheel Size (Front) | 13 inches |
| Blade Engagement | Electric PTO |
| Type | Zero Turn |
| Deck Gauge | 10-gauge |
| Fuel Capacity | 3.5 gallons |
| Turning Radius | Zero |
