Need help?Do you have a question about the Worx Nitro SWITCHDRIVER WX177L and is the answer not in the manual?
General| Type | Cordless Drill/Driver |
|---|---|
| Voltage | 20V |
| Chuck Size | 1/2 inch |
| Speed Settings | 2 |
| Battery Type | Lithium-Ion |
| No Load Speed | 0-400/0-1500 RPM |
Ensure a clean, well-lit area, avoid explosive atmospheres, and keep bystanders clear.
Match plugs, avoid grounding, protect from moisture, and use RCD in damp locations.
Stay alert, use PPE, prevent accidental starts, and follow proper tool usage and care.
Handle, charge, and use battery packs safely, avoiding damage and misuse.
Adhere to specific safety guidelines for drilling, including bit usage and operation.
Handle battery packs with care to prevent dismantling, heat exposure, short circuits, or mechanical shock.
Install battery pack, observe LED lights, and understand initial boot screen indicators.
Install bits, set modes, adjust torque, and prepare the tool for use.
Understand forward/reverse rotation control, trigger operation, and speed adjustments.
Learn how the LED light indicates operation status, battery capacity, and system protection.
Perform basic maintenance by cleaning and storing the tool properly, avoid water or chemical cleaners.
Understand recommended ambient temperature ranges for tool use, storage, and charging.
To Next Page
