Worx Nitro WX891L User Manual

Worx Nitro WX891L

10 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

WX891L WX891L.X

20V Cordless Drain Auger EN

Déboucheur de canalisations sans fil 20V F

Tornillo sinfín de drenaje de 20 V sin cable ES

P05

P10

P16

Table of Contents

Questions and Answers:

S
Stephanie KellyJul 28, 2025
What to do if the cable cannot wrap obstruction in Worx Nitro WX891L Tools?
- D
  David ThomasJul 28, 2025
  If the cable cannot wrap the obstruction, push the Feed Handle to neutral to allow the obstruction to wrap around the shaft. Then, switch the Rotation button R/L until the obstruction is dislodged. To retract the cable: set the L position, set the Feed Handle in retract mode (the indicator will display "R"), and squeeze the variable speed trigger to slowly retract the cable and pull the obstruction through the drain.
T
Tammy NealAug 13, 2025
What to do if the cable is twisted in Worx Nitro WX891L?
- K
  knightcrystalAug 13, 2025
  If the cable is twisted, release the variable speed trigger to stop rotation. Set the Feed Handle in neutral and set the R position. Lightly press the variable speed trigger to allow the cable to free itself. If you are unable to clear the pipe or encounter unresolved problems, please contact a professional.

Worx Nitro WX891L Specifications

General

Type	Cordless Impact Wrench
Voltage	20V
Chuck Size	1/2 inch
Battery Type	Lithium-Ion
Impact Rate	0-3200 IPM

Summary

General Power Tool Safety Warnings

Work Area Safety

Guidelines for maintaining a clean and well-lit workspace to prevent accidents.

Electrical Safety

Precautions regarding plugs, grounding, avoiding wet conditions, and cord care.

Personal Safety

Advice on staying alert, using protective equipment, and preventing unintentional starts.

Power Tool Use and Care

Instructions on proper tool usage, maintenance, storage, and avoiding misuse.

Safety Instructions for Drain Augers

Cable Handling and Operation

Safety tips for handling rotating cables, using protective gear, and hygiene.

Safety Warnings for Battery Pack

Battery Pack Handling and Storage

Precautions against dismantling, heat exposure, short-circuiting, and improper storage.

Battery Pack Use and Care

Guidelines for proper charging, use with compatible tools, and handling leaks.

Technical Data

Operating Instructions

Removing the Battery Pack

Step-by-step guide to safely detach the battery pack from the tool.

Charging the Battery Pack

Instructions for connecting and charging the battery pack.

Installing the Battery Pack

Procedure for correctly inserting the battery pack into the tool.

Set the Rotation Button

Guidance on setting the rotation direction and feed handle for operation.

Advancing and Retracting the Cable

Instructions for feeding the cable into the drain and managing its movement.

Maintain Tools With Care

For Battery Tools

Cleaning the Drain Auger

Trouble Shooting

Cable Stuck in Pipe

Solutions for when the cable and obstruction are stuck and cannot be retracted.

Cable Cannot Wrap Obstruction

Troubleshooting steps if the cable fails to wrap around the obstruction.

Cable is Twisted

Guidance on how to resolve a twisted cable situation.

Related product manuals

Preview: Worx Nitro SWITCHDRIVER WX177L

Worx Nitro SWITCHDRIVER WX177L